Miboxer 4-Zone Controller Receiver Box DC 12-24V for Single Color, CCT or RGBW LED Strip Light
The MiBoxer FUT035 3CCT, FUT036 Single Color and FUT038 5Pin RGBW Controller, with 4 output channels which are compatible with RF Touch Remote, you can set 16 million colors and 12 dynamic modes, brightness and speed adjustable, and the control distance up to 30 meters. This product adopts the widely used 2.4GHz wireless technology with the features of low power consumption, long signal transmitting strong anti-interference, etc. Widely used for the controlling of hotel lighting and home lighting.
Use this wireless RF remote with Waterproof RGB or MiLight/MiBoxer RGB or RGBW controllers for LED strip light operation or with compatible LED smart bulbs and RGBW flood lights. Choose from thousands of color options with the touch-activated color-selection wheel, or select pure white. Control speed, brightness, and dynamic or static color modes from up to 98' away in open air. The remote also has 4 zone-control buttons for lights in different areas.
Pairing Instructions:
1. Power off the MiBoxer Controller and wait for 10 seconds, then power it on again.
2. On the Mi Light Remote. short-press the "I" button (above the number between 1-4) 3 times within 3 seconds
3. Test if it works. Repeat the process if it didn't pair, as it may have timed out.
Dynamic mode table
M1: Fade in and fade out Here different colors fade into each other
M2: Strobe white Just white color flashes up
M3: RGBW fade in fade out This program fades in and fades out the color red, green, blue and white one after another
M4: Color flash in this program, red, green, blue, white yellow purple flashes to change
M5: Disco Different colors strobe and flash to change
M6: Red color ramp up and flash in this program, red color brightens from 0%-100% and shuts down, then flashes three times
M7: Green color ramp up and flash in this program, green color brightens from 0%-100% and shuts down, then flashes three times
M8: Blue color ramp up and flash in this program, blue color brightens from 0%-100% and shuts down, then flashes three times
M9: Color change + flash Here several colors fade into each other and then flash randomly Note: The colors can be dimmed under any mode; the speed of any mode can be adjustable. For RGB LED strip light, the white is mixed from red, Green and blue, so the white is not pure.
The MiBoxer FUT035 3CCT, FUT036 Single Color and FUT038 5Pin RGBW Controller, with 4 output channels which are compatible with RF Touch Remote, you can set 16 million colors and 12 dynamic modes, brightness and speed adjustable, and the control distance up to 30 meters. This product adopts the widely used 2.4GHz wireless technology with the features of low power consumption, long signal transmitting strong anti-interference, etc. Widely used for the controlling of hotel lighting and home lighting.
Use this wireless RF remote with Waterproof RGB or MiLight/MiBoxer RGB or RGBW controllers for LED strip light operation or with compatible LED smart bulbs and RGBW flood lights. Choose from thousands of color options with the touch-activated color-selection wheel, or select pure white. Control speed, brightness, and dynamic or static color modes from up to 98' away in open air. The remote also has 4 zone-control buttons for lights in different areas.
Pairing Instructions:
1. Power off the MiBoxer Controller and wait for 10 seconds, then power it on again.
2. On the Mi Light Remote. short-press the "I" button (above the number between 1-4) 3 times within 3 seconds
3. Test if it works. Repeat the process if it didn't pair, as it may have timed out.
Dynamic mode table
M1: Fade in and fade out Here different colors fade into each other
M2: Strobe white Just white color flashes up
M3: RGBW fade in fade out This program fades in and fades out the color red, green, blue and white one after another
M4: Color flash in this program, red, green, blue, white yellow purple flashes to change
M5: Disco Different colors strobe and flash to change
M6: Red color ramp up and flash in this program, red color brightens from 0%-100% and shuts down, then flashes three times
M7: Green color ramp up and flash in this program, green color brightens from 0%-100% and shuts down, then flashes three times
M8: Blue color ramp up and flash in this program, blue color brightens from 0%-100% and shuts down, then flashes three times
M9: Color change + flash Here several colors fade into each other and then flash randomly Note: The colors can be dimmed under any mode; the speed of any mode can be adjustable. For RGB LED strip light, the white is mixed from red, Green and blue, so the white is not pure.
Original: $28.99
-65%$28.99
$10.15Description
The MiBoxer FUT035 3CCT, FUT036 Single Color and FUT038 5Pin RGBW Controller, with 4 output channels which are compatible with RF Touch Remote, you can set 16 million colors and 12 dynamic modes, brightness and speed adjustable, and the control distance up to 30 meters. This product adopts the widely used 2.4GHz wireless technology with the features of low power consumption, long signal transmitting strong anti-interference, etc. Widely used for the controlling of hotel lighting and home lighting.
Use this wireless RF remote with Waterproof RGB or MiLight/MiBoxer RGB or RGBW controllers for LED strip light operation or with compatible LED smart bulbs and RGBW flood lights. Choose from thousands of color options with the touch-activated color-selection wheel, or select pure white. Control speed, brightness, and dynamic or static color modes from up to 98' away in open air. The remote also has 4 zone-control buttons for lights in different areas.
Pairing Instructions:
1. Power off the MiBoxer Controller and wait for 10 seconds, then power it on again.
2. On the Mi Light Remote. short-press the "I" button (above the number between 1-4) 3 times within 3 seconds
3. Test if it works. Repeat the process if it didn't pair, as it may have timed out.
Dynamic mode table
M1: Fade in and fade out Here different colors fade into each other
M2: Strobe white Just white color flashes up
M3: RGBW fade in fade out This program fades in and fades out the color red, green, blue and white one after another
M4: Color flash in this program, red, green, blue, white yellow purple flashes to change
M5: Disco Different colors strobe and flash to change
M6: Red color ramp up and flash in this program, red color brightens from 0%-100% and shuts down, then flashes three times
M7: Green color ramp up and flash in this program, green color brightens from 0%-100% and shuts down, then flashes three times
M8: Blue color ramp up and flash in this program, blue color brightens from 0%-100% and shuts down, then flashes three times
M9: Color change + flash Here several colors fade into each other and then flash randomly Note: The colors can be dimmed under any mode; the speed of any mode can be adjustable. For RGB LED strip light, the white is mixed from red, Green and blue, so the white is not pure.
